Polyvinylidene Fluoride
Also available in a HPV bearing grade, this plastic is a more economical solution PEEK & PEI that have similar properties. The HPV has excellent wear resistance and an internal lubricant.
Techtron HPV PPS sheet
Thickness: 8 to 50mm
Sizes: 1000 x 610 / 3000 x 610mm
Techtron HPV PPS rod
Outside diameter: 10 to 100mm
Techtron HPV PPS tube
Outside diameter: 60 to 600mm
Techtron HPV PPS machined parts
Non HPV versions and other variations are available on request.
Polyvinylidene Fluoride
Symalit
A versatile material that is sometimes used as a replacement for PTFE or Teflon where higher wear resistance is needed. Good impact resistance and is a food grade plastic.
PVDF sheet
Thickness: 3 to 40mm
Sizes: 1000 x 610mm / 3000 x 610mm
PVDF rod
Outside diameter: 10 to 150mm
PVDF machined parts
Polysulphone
Non UV stabilized, properties are generally lower than PEI-1000. Can be used to replace Polycarbonate where a higher operating temperature is required.
Polysulphone PSU-1000 sheet
Thickness: 10 to 50mm
Sizes: 1000 x 300mm / 3000 x 300mm
Polysulphone PSU-1000 rod
Outside diameter: 10 to 100mm
Polysulphone PSU-1000 machined parts
Polyetheretherketone
Ketron
PEEK-1000 Sheet
Thickness: 8 to 50mm
Sizes: 1000 x 610mm / 3000 x 610mm
PEEK-1000 rod
Outside diameter: 8 to 120mm
PEEK-1000 tube
Outside diameter: 60 to 600mm
PEEK-1000 Machined parts
Slight variations apply to the HPV version of PEEK
Polyetherimide
Outstanding mechanical, thermal and electrical properties, high strength and extremely rigid. Also has excellent fatigue properties.
PEI Sheet
Thickness: 10 to 50mm
Sizes: 1000 x 300mm / 3000 x 300mm
PEI rod
Outside diameter: 10 to 100mm
PEI machined parts